scan results are quite bad after some scans on current git

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=4531

wraiden

03-01-2008 16:49:06

My Card RaLink RT2600 802.11 MIMO

Log of Initialization

phy1 -> rt61pci_validate_eeprom EEPROM recovery - Led 0xe0ff
phy1 -> rt61pci_validate_eeprom EEPROM recovery - RSSI OFFSET BG 0x0000
phy1 -> rt61pci_validate_eeprom EEPROM recovery - RSSI OFFSET BG 0x0000
phy1 -> rt2x00_set_chip Info - Chipset detected - rt 0401, rf 0004, rev 0002661d.
phy1 Selected rate control algorithm 'pid'
Registered led device rt61pci
phy1 -> rt2x00lib_request_firmware Info - Loading firmware file 'rt2661.bin'.
phy1 -> rt2x00lib_request_firmware Info - Firmware detected - version 0.8.
phy1 -> rt61pci_init_bbp Debug - Start initialization from EEPROM...
phy1 -> rt61pci_init_bbp Debug - ...End initialization from EEPROM.


The steps i've done

modprobe rt61pci
ip link set wlan0 up
iwlist wlan0 scan ( getting 3 or 4 APs )
iwlist wlan0 scan ( getting 2 APs )
iwlist wlan0 scan ( getting 1 APs )
iwlist wlan0 scan ( getting no APs )

Now i do the following
ip link set wlan0 down
ip link set wlan0 up
iwlist wlan0 scan ( getting all 4 APs )


I think the link- and quality-tuning is messed up
on at least rt61pci now.

If you need more info or dumps or what ever let me know.


Marc

wraiden

16-01-2008 07:38:18

since "rt2x00 Don't recalculate entry_idx" this behavior seems fixed

thanks to ivd

marc