hostap crashs

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=6044

niv

09-01-2010 21:48:25

what is wrong here?

[quote13n4f8v9]# hostapd -dd /etc/hostapd/hostapd.conf
Configuration file /etc/hostapd/hostapd.conf
ctrl_interface_group=0
Opening raw packet socket for ifindex 858864176
BSS count 1, BSSID mask ffffffffffff (0 bits)
SIOCGIWRANGE WE(compiled)=22 WE(source)=21 enc_capa=0xf
nl80211 Added 802.11b mode based on 802.11g information
Allowed channel mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
RATE[0] rate=10 flags=0x2
RATE[1] rate=20 flags=0x6
RATE[2] rate=55 flags=0x6
RATE[3] rate=110 flags=0x6
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
Passive scanning not supported
Flushing old station entries
Deauthenticate all stations
Mode IEEE 802.11g Channel 1 Frequency 2412 MHz
Using interface ra0 with hwaddr 000fea9139b3 and ssid 'iris6i4up'
Failed to set beacon head/tail
Failed to set CTS protect in kernel driver
Failed to set Short Slot Time option in kernel driver
Could not set preamble for kernel driver
ra0 Setup of interface done.
MGMT (TX callback) ACK
Wireless event cmd=0x8b06 len=8
MGMT (TX callback) ACK
unknown mgmt cb frame subtype 4
[/quote13n4f8v9]

kernel version 2.6.31-rc6-wl
card Network controller RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
hostapd v0.6.9

[quote13n4f8v9]cat /etc/hostapd/hostapd.conf |grep -v ^#
interface=ra0
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=iris6i4up
hw_mode=g
channel=1
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wme_enabled=1
wme_ac_bk_cwmin=4
wme_ac_bk_cwmax=10
wme_ac_bk_aifs=7
wme_ac_bk_txop_limit=0
wme_ac_bk_acm=0
wme_ac_be_aifs=3
wme_ac_be_cwmin=4
wme_ac_be_cwmax=10
wme_ac_be_txop_limit=0
wme_ac_be_acm=0
wme_ac_vi_aifs=2
wme_ac_vi_cwmin=3
wme_ac_vi_cwmax=4
wme_ac_vi_txop_limit=94
wme_ac_vi_acm=0
wme_ac_vo_aifs=2
wme_ac_vo_cwmin=2
wme_ac_vo_cwmax=3
wme_ac_vo_txop_limit=47
wme_ac_vo_acm=0
wep_default_key=0
ap_max_inactivity=3000
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=0[/quote13n4f8v9]