Does RT2870_LinuxSTA_V2.3.0.0.tar.tar work on Suse linux 9.3

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=6054

tina

17-03-2010 18:41:29

Hello

I downloaded the above driver from http//www.ralinktech.com/support.php?s=2 which is pointed to by one of this website's web pages. I followed Build instructions and it does not work. README_STA says the driver was tested on Redhat and not Suse Linux 9.3. I have attached a log for a technical person to investigate the problem and the following information about a WUBR-501 device.

1. The wireless adapter is connected to one of the usbs of a PC. A light inside the adapter is flashing but I can not connect to the internet by using a web browser on the Suse linux 9.3. The Suse linux can connect to the internet with a wired cable.
2. I can locally ping my host but not the Access point, 192.168.1.254, please refer to the log. However, my MS Windows can connect to the internet through this Access point. I have attached the configuration file, RT2870STA.dat, for the technical person.
3. I rebooted the system but it does not automatically load the driver as it says in MORE INFORMATION section. I did not do D) because there is a directory called network and not a file in /etc/sysconfig directory.

Have I missed out some things?

Tina.

IvD

17-03-2010 19:09:52

[quote1aoeytou]We don't provide support for drivers which have not been released by this project, this means we don't support the drivers downloaded from the Ralink website or any other project and we don't support the Windows, MacOS or BSD drivers.[/quote1aoeytou]

tina

17-03-2010 23:43:52

Are there drivers in this website which support the WUBR-501 device on Suse Linux 9.3?

Tina.

IvD

18-03-2010 01:08:00

IMPORTANT READ BEFORE POSTING!!![/urlmbjgbf5r]