RT2x00 WoW support

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=6200

ktdr

25-12-2011 05:10:12

Dear upstream developers,

I'd like to be able to manage WoW option on Ralink 5390 on my HP Pavilion dv6-6030er. WoW is enabled by default in BIOS, which is locked by vendor. So I can't switch it off. Using ethtool doesn't help, because driver can't hanlder with WoW. My notebook wakes on wi-fi activity when I'd like it to be asleep. I had sent a bug report to Debian GNU/Linux maintainers and got the following answer (below my bug report is attached)

I'm surprised that wake-on-wlan is enabled by default for you --- is
that a BIOS setting?

In any event, the rt2800pci driver does not know how to handle the
wake-on-wlan bit, and that is a deficiency relative to the Windows
driver. I'd recommend getting in touch with the upstream developers
at users@rt2x00.serialmonkey.com to work on implementing it. Please
cc either me or this bug log when doing so so we can track it. They
may ask you to read registers set by the Windows driver or to test
patches. Once a patch has been accepted upstream, we can apply it.

Hope that helps,
Jonathan

-------- ???????????? ????????? --------
24.12.2011, 2217, "pol kh" <kh3095@yandex.ru>

Package linux-2.6
Version 3.1.5-1
Severity normal

Dear Maintainer,

I can't manage WoW option on Ralink 5390 wi-fi card on my HP Pavilion dv6-6030er. Running Debian GNU/Linux testing+unstable. Notebook is switching on sometimes with wi-fi activity. In Win7 WoW can be switched off, but in GNU/Linux I can't do this. Also I can't switch WoW or WOL option off in BIOS, because this options are locked by vendor. I'm afaid of using cracked BIOS version with advanced menu available.

Some info

$ lspci | grep Ralink
0400.0 Network controller Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip]

# ifconfig
eth0 Link encapEthernet HWaddr 68b599dfafb0
UP BROADCAST MULTICAST MTU1500 Metric1
RX packets0 errors0 dropped0 overruns0 frame0
TX packets0 errors0 dropped0 overruns0 carrier0
collisions0 txqueuelen1000
RX bytes0 (0.0 B) TX bytes0 (0.0 B)
Interrupt45 Base address0x4000

lo Link encapLocal Loopback
inet addr127.0.0.1 Mask255.0.0.0
inet6 addr 1/128 ScopeHost
UP LOOPBACK RUNNING MTU16436 Metric1
RX packets2024 errors0 dropped0 overruns0 frame0
TX packets2024 errors0 dropped0 overruns0 carrier0
collisions0 txqueuelen0
RX bytes126000 (123.0 KiB) TX bytes126000 (123.0 KiB)

wlan0 Link encapEthernet HWaddr 90004e658a5a
inet addr192.168.1.103 Bcast192.168.1.255 Mask255.255.255.0
inet6 addr fe8092004efffe658a5a/64 ScopeLink
UP BROADCAST RUNNING MULTICAST MTU1500 Metric1
RX packets161529 errors0 dropped0 overruns0 frame0
TX packets120128 errors0 dropped0 overruns0 carrier0
collisions0 txqueuelen1000
RX bytes159220810 (151.8 MiB) TX bytes19366763 (18.4 MiB)

# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bgn ESSID"TP-LINK"
ModeManaged Frequency2.412 GHz Access Point F4EC38A57A18
Bit Rate=58.5 Mb/s Tx-Power=20 dBm
Retry long limit7 RTS throff Fragment throff
Encryption keyoff
Power Managementon
Link Quality=70/70 Signal level=-35 dBm
Rx invalid nwid0 Rx invalid crypt0 Rx invalid frag0
Tx excessive retries40 Invalid misc626 Missed beacon0

# ethtool wlan0
Settings for wlan0
Link detected yes

# ethtool -s wlan0 wol d
Cannot get current wake-on-lan settings Operation not supported
not setting wol

-- Package-specific info
** Version
Linux version 3.1.0-1-amd64 (Debian 3.1.5-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-7) ) #1 SMP Sun Dec 11 203641 UTC 2011

** Command line
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=da760c42-f97a-4703-b0d7-0f25f4dbd8e7 ro quiet

** Tainted PCO (5121)
* Proprietary module has been loaded.
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.

** Kernel log
[ 4.489639] sd 4000 [sdb] Attached SCSI removable disk
[ 4.556130] input ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
[ 4.556275] Registered led device hphddprotect
[ 4.556285] hp_accel driver loaded
[ 4.672083] kvm Nested Virtualization enabled
[ 4.672086] kvm Nested Paging enabled
[ 4.830710] EXT4-fs (sda1) re-mounted. Opts (null)
[ 5.105730] EXT4-fs (sda1) re-mounted. Opts errors=remount-ro
[ 5.188647] loop module loaded
[ 5.947960] EXT4-fs (sda7) mounted filesystem with ordered data mode. Opts (null)
[ 5.980088] EXT4-fs (sda5) mounted filesystem with ordered data mode. Opts (null)
[ 6.001960] EXT4-fs (sda2) mounted filesystem with ordered data mode. Opts (null)
[ 6.028660] EXT4-fs (sda6) mounted filesystem with ordered data mode. Opts (null)
[ 7.171038] RPC Registered named UNIX socket transport module.
[ 7.171041] RPC Registered udp transport module.
[ 7.171042] RPC Registered tcp transport module.
[ 7.171044] RPC Registered tcp NFSv4.1 backchannel transport module.
[ 7.241515] FS-Cache Loaded
[ 7.260282] FS-Cache Netfs 'nfs' registered for caching
[ 7.274563] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.751427] fuse init (API version 7.17)
[ 9.310007] input ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 10.467534] r8169 00000300.0 eth0 link down
[ 10.468445] ADDRCONF(NETDEV_UP) eth0 link is not ready
[ 10.535481] phy0 -> rt2800pci_mcu_status Error - MCU request failed, no response from hardware
[ 10.573206] ADDRCONF(NETDEV_UP) wlan0 link is not ready
[ 12.910443] vgaarb this pci device is not a vga device
[ 12.910455] vgaarb this pci device is not a vga device
[ 12.910463] vgaarb this pci device is not a vga device
[ 12.910471] vgaarb this pci device is not a vga device
[ 12.910480] vgaarb this pci device is not a vga device
[ 12.910488] vgaarb this pci device is not a vga device
[ 12.910496] vgaarb this pci device is not a vga device
[ 12.910504] vgaarb this pci device is not a vga device
[ 12.910512] vgaarb this pci device is not a vga device
[ 12.910520] vgaarb this pci device is not a vga device
[ 12.910528] vgaarb this pci device is not a vga device
[ 12.910537] vgaarb this pci device is not a vga device
[ 12.910545] vgaarb this pci device is not a vga device
[ 12.910553] vgaarb this pci device is not a vga device
[ 12.910561] vgaarb this pci device is not a vga device
[ 12.910569] vgaarb this pci device is not a vga device
[ 12.910576] vgaarb this pci device is not a vga device
[ 12.910584] vgaarb this pci device is not a vga device
[ 12.910592] vgaarb this pci device is not a vga device
[ 12.910600] vgaarb this pci device is not a vga device
[ 12.910608] vgaarb this pci device is not a vga device
[ 12.910616] vgaarb this pci device is not a vga device
[ 12.910624] vgaarb this pci device is not a vga device
[ 12.910642] vgaarb this pci device is not a vga device
[ 12.910659] vgaarb device changed decodes PCI00000200.0,olddecodes=io+mem,decodes=noneowns=none
[ 12.910674] vgaarb this pci device is not a vga device
[ 12.910685] vgaarb this pci device is not a vga device
[ 12.910696] vgaarb this pci device is not a vga device
[ 12.910707] vgaarb this pci device is not a vga device
[ 12.964707] [fglrx] ATIF platform detected with notification ID 0x81
[ 13.072811] lp driver loaded but no devices found
[ 13.089727] ppdev user-space parallel port driver
[ 13.740810] wlan0 authenticate with f4ec38a57a18 (try 1)
[ 13.742322] wlan0 authenticated
[ 13.742690] wlan0 associate with f4ec38a57a18 (try 1)
[ 13.746657] wlan0 RX AssocResp from f4ec38a57a18 (capab=0x431 status=0 aid=1)
[ 13.746661] wlan0 associated
[ 13.761105] ADDRCONF(NETDEV_CHANGE) wlan0 link becomes ready
[ 14.207792] powernow-k8 Found 1 AMD Phenom(tm) II N660 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[ 14.312430] powernow-k8 0 pstate 0 (3000 MHz)
[ 14.312433] powernow-k8 1 pstate 1 (2700 MHz)
[ 14.312435] powernow-k8 2 pstate 2 (2000 MHz)
[ 14.312436] powernow-k8 3 pstate 3 (1500 MHz)
[ 14.312437] powernow-k8 4 pstate 4 (800 MHz)
[ 14.536625] [fglrx] Could not enable MSI; System prevented initialization
[ 14.538118] [fglrx] Firegl kernel thread PID 1818
[ 14.538288] [fglrx] Firegl kernel thread PID 1819
[ 14.538489] [fglrx] Firegl kernel thread PID 1820
[ 14.538672] [fglrx] IRQ 18 Enabled
[ 14.637767] fglrx_pci 00000200.0 irq 49 for MSI/MSI-X
[ 14.639223] [fglrx] Firegl kernel thread PID 1821
[ 14.639408] [fglrx] Firegl kernel thread PID 1822
[ 14.639600] [fglrx] Firegl kernel thread PID 1823
[ 14.639814] [fglrx] IRQ 49 Enabled
[ 16.171917] [fglrx] Gart USWC size1280 M.
[ 16.171920] [fglrx] Gart cacheable size508 M.
[ 16.171925] [fglrx] Reserved FB block Shared offset0, size1000000
[ 16.171927] [fglrx] Reserved FB block Unshared offsetf8fc000, size404000
[ 16.171929] [fglrx] Reserved FB block Unshared offset3fff4000, sizec000
[ 16.189491] [fglrx] Gart USWC size1279 M.
[ 16.189494] [fglrx] Gart cacheable size508 M.
[ 16.189498] [fglrx] Reserved FB block Shared offset0, size1000000
[ 16.189500] [fglrx] Reserved FB block Unshared offsetfbfa000, size401000
[ 16.189502] [fglrx] Reserved FB block Unshared offsetfffb000, size5000
[ 23.920153] wlan0 no IPv6 routers present
[ 29.824575] EXT4-fs (sda1) re-mounted. Opts errors=remount-ro,commit=0
[ 30.122106] EXT4-fs (sda7) re-mounted. Opts commit=0
[ 30.351189] EXT4-fs (sda5) re-mounted. Opts commit=0
[ 30.428435] EXT4-fs (sda2) re-mounted. Opts commit=0
[ 30.740795] EXT4-fs (sda6) re-mounted. Opts commit=0
[ 5029.620009] CE hpet increased min_delta_ns to 20113 nsec
[25900.871739] [fglrx__mc_heap_map_to_gart_space] *ERROR* The area of memory has already been mapped
[25900.871749] [fglrxMCIL_MapToGartSpace] *ERROR* Could not map memory into GART space!
[26762.625906] input ACPI Virtual Keyboard Device as /devices/virtual/input/input17

** Model information
sys_vendor Hewlett-Packard
product_name HP Pavilion dv6 Notebook PC
product_version 0596100000244710000010100
chassis_vendor Hewlett-Packard
chassis_version Chassis Version
bios_vendor Hewlett-Packard
bios_version F.21
board_vendor Hewlett-Packard
board_name 164B
board_version 06.1F

** Loaded modules
powernow_k8
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
parport_pc
ppdev
lp
parport
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
kvm_amd
kvm
snd_hda_codec_hdmi
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
sp5100_tco
i2c_piix4
snd_seq_midi_event
uvcvideo
videodev
media
v4l2_compat_ioctl32
snd_seq
cryptd
aes_x86_64
aes_generic
snd_timer
ecb
hp_wmi
snd_seq_device
fglrx(P)
joydev
btusb
psmouse
sparse_keymap
snd
bluetooth
i2c_core
usbhid
arc4
rt2800pci
rt2800lib
crc_ccitt
rt2x00pci
rt2x00lib
soundcore
snd_page_alloc
edac_core
mac80211
cfg80211
rfkill
hp_accel
lis3lv02d
eeprom_93cx6
shpchp
rts_pstor(C)
k10temp
evdev
input_polldev
hid
edac_mce_amd
serio_raw
pcspkr
pci_hotplug
wmi
video
ac
battery
power_supply
button
processor
ext4
mbcache
jbd2
crc16
sd_mod
sr_mod
cdrom
crc_t10dif
xhci_hcd
ohci_hcd
r8169
mii
thermal
thermal_sys
ahci
libahci
libata
ehci_hcd
scsi_mod
usbcore

** Network interface configuration
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp

** Network status
*** IP interfaces and addresses
1 lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 000000000000 brd 000000000000
inet 127.0.0.1/8 scope host lo
inet6 1/128 scope host
valid_lft forever preferred_lft forever
2 eth0 <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 68b599dfafb0 brd ffffffffffff
3 wlan0 <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 90004e658a5a brd ffffffffffff
inet 192.168.1.103/24 brd 192.168.1.255 scope global wlan0
inet6 fe8092004efffe658a5a/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo 125500 2014 0 0 0 0 0 0 125500 2014 0 0 0 0 0 0
eth0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0 159003548 161095 0 0 0 0 0 0 19274952 119662 0 0 0 0 0 0

*** Protocol statistics
Ip
158367 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
153393 incoming packets delivered
120106 requests sent out
Icmp
9 ICMP messages received
0 input ICMP message failed.
ICMP input histogram
destination unreachable 9
150 ICMP messages sent
0 ICMP messages failed
ICMP output histogram
destination unreachable 150
IcmpMsg
InType3 9
OutType3 150
Tcp
6048 active connections openings
18 passive connection openings
851 failed connection attempts
210 connection resets received
8 connections established
143294 segments received
110336 segments send out
349 segments retransmited
157 bad segments received.
1541 resets sent
Udp
9152 packets received
150 packets to unknown port received.
0 packet receive errors
8939 packets sent
UdpLite
TcpExt
158 packets pruned from receive queue because of socket buffer overrun
2273 TCP sockets finished time wait in fast timer
3067 delayed acks sent
2 delayed acks further delayed because of locked socket
Quick ack mode was activated 670 times
89195 packet headers predicted
14261 acknowledgments not containing data payload received
2175 predicted acknowledgments
4 times recovered from packet loss by selective acknowledgements
Detected reordering 1 times using time stamp
1 congestion windows fully recovered without slow start
1 congestion windows partially recovered using Hoe heuristic
104 congestion windows recovered without slow start after partial ack
1 timeouts after reno fast retransmit
4 timeouts after SACK recovery
1 timeouts in loss state
4 fast retransmits
2 retransmits in slow start
267 other TCP timeouts
5015 packets collapsed in receive queue due to low socket buffer
547 DSACKs sent for old packets
24 DSACKs received
61 connections reset due to unexpected data
130 connections reset due to early user close
15 connections aborted due to timeout
TCPDSACKIgnoredNoUndo 6
TCPSpuriousRTOs 1
TCPSackShiftFallback 134
TCPBacklogDrop 17
IpExt
InMcastPkts 1120
OutMcastPkts 404
InBcastPkts 264
OutBcastPkts 184
InOctets 156775640
OutOctets 15280955
InMcastOctets 36679
OutMcastOctets 16655
InBcastOctets 49177
OutBcastOctets 38633

** PCI devices
0000.0 Host bridge [0600] Advanced Micro Devices [AMD] RS880 Host Bridge [10229601]
Subsystem Advanced Micro Devices [AMD] Device [10221234]
Control I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency 0
Capabilities <access denied>

0001.0 PCI bridge [0604] Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [10229602] (prog-if 00 [Normal decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64
Bus primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge 00004000-00004fff
Memory behind bridge f0500000-f06fffff
Prefetchable memory behind bridge 00000000d0000000-00000000dfffffff
Secondary status 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities <access denied>

0003.0 PCI bridge [0604] Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 1) [1022960b] (prog-if 00 [Normal decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Bus primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge 00003000-00003fff
Memory behind bridge f0400000-f04fffff
Prefetchable memory behind bridge 00000000e0000000-00000000efffffff
Secondary status 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities <access denied>
Kernel driver in use pcieport

0004.0 PCI bridge [0604] Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [10229604] (prog-if 00 [Normal decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Bus primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge 00002000-00002fff
Prefetchable memory behind bridge 00000000f0000000-00000000f00fffff
Secondary status 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities <access denied>
Kernel driver in use pcieport

0005.0 PCI bridge [0604] Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [10229605] (prog-if 00 [Normal decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Bus primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge f0300000-f03fffff
Secondary status 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities <access denied>
Kernel driver in use pcieport

0006.0 PCI bridge [0604] Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [10229606] (prog-if 00 [Normal decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Bus primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge f0200000-f02fffff
Secondary status 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities <access denied>
Kernel driver in use pcieport

0007.0 PCI bridge [0604] Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [10229607] (prog-if 00 [Normal decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Bus primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge f0100000-f01fffff
Secondary status 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities <access denied>
Kernel driver in use pcieport

0011.0 SATA controller [0106] ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [10024391] (prog-if 01 [AHCI 1.0])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 19
Region 0 I/O ports at 5038
Region 1 I/O ports at 504c
Region 2 I/O ports at 5030
Region 3 I/O ports at 5048
Region 4 I/O ports at 5010
Region 5 Memory at f070a000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use ahci

0012.0 USB controller [0c03] ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [10024397] (prog-if 10 [OHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 18
Region 0 Memory at f0709000 (32-bit, non-prefetchable)
Kernel driver in use ohci_hcd

0012.2 USB controller [0c03] ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [10024396] (prog-if 20 [EHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin B routed to IRQ 17
Region 0 Memory at f0708000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use ehci_hcd

0013.0 USB controller [0c03] ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [10024397] (prog-if 10 [OHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 18
Region 0 Memory at f0707000 (32-bit, non-prefetchable)
Kernel driver in use ohci_hcd

0013.2 USB controller [0c03] ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [10024396] (prog-if 20 [EHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin B routed to IRQ 17
Region 0 Memory at f0706000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use ehci_hcd

0014.0 SMBus [0c05] ATI Technologies Inc SBx00 SMBus Controller [10024385] (rev 42)
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use piix4_smbus

0014.2 Audio device [0403] ATI Technologies Inc SBx00 Azalia (Intel HDA) [10024383] (rev 40)
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 16
Region 0 Memory at f0700000 (64-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use snd_hda_intel

0014.3 ISA bridge [0601] ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002439d] (rev 40)
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0

0014.4 PCI bridge [0604] ATI Technologies Inc SBx00 PCI to PCI Bridge [10024384] (rev 40) (prog-if 01 [Subtractive decode])
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64
Bus primary=00, secondary=07, subordinate=07, sec-latency=64
Secondary status 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

0016.0 USB controller [0c03] ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [10024397] (prog-if 10 [OHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 18
Region 0 Memory at f0705000 (32-bit, non-prefetchable)
Kernel driver in use ohci_hcd

0016.2 USB controller [0c03] ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [10024396] (prog-if 20 [EHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 64, Cache Line Size 64 bytes
Interrupt pin B routed to IRQ 17
Region 0 Memory at f0704000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use ehci_hcd

0018.0 Host bridge [0600] Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [10221200]
Control I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities <access denied>

0018.1 Host bridge [0600] Advanced Micro Devices [AMD] Family 10h Processor Address Map [10221201]
Control I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

0018.2 Host bridge [0600] Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [10221202]
Control I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

0018.3 Host bridge [0600] Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [10221203]
Control I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities <access denied>
Kernel driver in use k10temp

0018.4 Host bridge [0600] Advanced Micro Devices [AMD] Family 10h Processor Link Control [10221204]
Control I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

0105.0 VGA compatible controller [0300] ATI Technologies Inc RS880M [Mobility Radeon HD 4200 Series] [10029712] (prog-if 00 [VGA controller])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 18
Region 0 Memory at d0000000 (32-bit, prefetchable)
Region 1 I/O ports at 4000
Region 2 Memory at f0600000 (32-bit, non-prefetchable)
Region 5 Memory at f0500000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities <access denied>
Kernel driver in use fglrx_pci

0105.1 Audio device [0403] ATI Technologies Inc RS880 HDMI Audio [Radeon HD 4200 Series] [1002970f]
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin B routed to IRQ 19
Region 0 Memory at f0610000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use snd_hda_intel

0200.0 VGA compatible controller [0300] ATI Technologies Inc Whistler [AMD Radeon HD 6600M Series] [10026741] (prog-if 00 [VGA controller])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 49
Region 0 Memory at e0000000 (64-bit, prefetchable)
Region 2 Memory at f0400000 (64-bit, non-prefetchable)
Region 4 I/O ports at 3000
[virtual] Expansion ROM at f0420000 [disabled]
Capabilities <access denied>
Kernel driver in use fglrx_pci

0300.0 Ethernet controller [0200] Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec8168] (rev 06)
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 45
Region 0 I/O ports at 2000
Region 2 Memory at f0004000 (64-bit, prefetchable)
Region 4 Memory at f0000000 (64-bit, prefetchable)
Capabilities <access denied>
Kernel driver in use r8169

0400.0 Network controller [0280] Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] [1814539f]
Subsystem Hewlett-Packard Company Pavilion DM1Z-3000 PCIe wireless card [103c1637]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 17
Region 0 Memory at f0300000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use rt2800pci

0500.0 Unassigned class [ff00] Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader [10ec5209] (rev 01)
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 18
Region 0 Memory at f0200000 (32-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use rts_pstor

0600.0 USB controller [0c03] NEC Corporation uPD720200 USB 3.0 Host Controller [10330194] (rev 04) (prog-if 30 [XHCI])
Subsystem Hewlett-Packard Company Device [103c164b]
Control I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency 0, Cache Line Size 64 bytes
Interrupt pin A routed to IRQ 19
Region 0 Memory at f0100000 (64-bit, non-prefetchable)
Capabilities <access denied>
Kernel driver in use xhci_hcd

** USB devices
Bus 001 Device 001 ID 1d6b0002 Linux Foundation 2.0 root hub
Bus 002 Device 001 ID 1d6b0002 Linux Foundation 2.0 root hub
Bus 003 Device 001 ID 1d6b0002 Linux Foundation 2.0 root hub
Bus 005 Device 001 ID 1d6b0002 Linux Foundation 2.0 root hub
Bus 006 Device 001 ID 1d6b0003 Linux Foundation 3.0 root hub
Bus 004 Device 001 ID 1d6b0001 Linux Foundation 1.1 root hub
Bus 007 Device 001 ID 1d6b0001 Linux Foundation 1.1 root hub
Bus 008 Device 001 ID 1d6b0001 Linux Foundation 1.1 root hub
Bus 003 Device 002 ID 064ee258 Suyin Corp.
Bus 004 Device 002 ID 046dc52f Logitech, Inc. Wireless Mouse M305
Bus 007 Device 002 ID 148f2000 Ralink Technology, Corp.
Bus 007 Device 003 ID 138a0018 Validity Sensors, Inc.

-- System Information
Debian Release wheezy/sid
APT prefers testing
APT policy (990, 'testing'), (500, 'unstable')
Architecture amd64 (x86_64)

Kernel Linux 3.1.0-1-amd64 (SMP w/2 CPU cores)
Locale LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell /bin/sh linked to /bin/dash

Versions of packages linux-image-3.1.0-1-amd64 depends on
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1

Versions of packages linux-image-3.1.0-1-amd64 recommends
ii firmware-linux-free 3

Versions of packages linux-image-3.1.0-1-amd64 suggests
pn grub-pc 1.99-14
pn linux-doc-3.1 <none>

Versions of packages linux-image-3.1.0-1-amd64 is related to
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink 0.34
pn xen-hypervisor <none>

-- debconf information
linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64 false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64 true
-------- ?????????? ????????????? ????????? --------

Thanks!