broken rt3090 with rt2x00pci

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=6221

bobbyprani

16-12-2012 20:37:33

Hi,

I have a rt3090 card shows by lspci -nn as

0600.0 Network controller [0280] Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe [18143090]

I am running ubuntu 12.10(also tried 12.04) and this card shows up as "Device not ready".
The log of dmesg shows as follows

[ 3.668410] -->RTUSBVenderReset
[ 3.668512] <--RTUSBVenderReset
[ 3.947399] 1. Phy Mode = 5
[ 3.947399] 2. Phy Mode = 5
[ 3.974264] phy mode> Error! The chip does not support 5G band 5!
[ 3.974302] RTMPSetPhyMode channel is out of range, use first channel=1
[ 3.990252] 3. Phy Mode = 9
[ 3.999622] MCS Set = ff 00 00 00 01
[ 4.010288] <==== rt28xx_init, Status=0
[ 4.011861] 0x1300 = 00064300
[ 4.574532] -->RTUSBVenderReset
[ 4.574657] <--RTUSBVenderReset
[ 4.852274] Key1Str is Invalid key length(0) or Type(0)
[ 4.852282] Key2Str is Invalid key length(0) or Type(0)
[ 4.852289] Key3Str is Invalid key length(0) or Type(0)
[ 4.852295] Key4Str is Invalid key length(0) or Type(0)
[ 4.852400] 1. Phy Mode = 5
[ 4.852401] 2. Phy Mode = 5
[ 4.879541] phy mode> Error! The chip does not support 5G band 5!
[ 4.879583] RTMPSetPhyMode channel is out of range, use first channel=1
[ 4.898769] 3. Phy Mode = 9
[ 4.908631] MCS Set = ff 00 00 00 01
[ 4.920487] <==== rt28xx_init, Status=0
[ 4.922000] 0x1300 = 00064300
[ 4.998980] IPv6 ADDRCONF(NETDEV_UP) eth1 link is not ready
[ 4.999266] IPv6 ADDRCONF(NETDEV_UP) eth1 link is not ready
[ 5.531620] -->RTUSBVenderReset
[ 5.531744] <--RTUSBVenderReset
[ 5.808517] Key1Str is Invalid key length(0) or Type(0)
[ 5.808523] Key2Str is Invalid key length(0) or Type(0)
[ 5.808527] Key3Str is Invalid key length(0) or Type(0)
[ 5.808531] Key4Str is Invalid key length(0) or Type(0)
[ 5.808606] 1. Phy Mode = 5
[ 5.808606] 2. Phy Mode = 5
[ 5.847125] phy mode> Error! The chip does not support 5G band 5!
[ 5.847171] RTMPSetPhyMode channel is out of range, use first channel=1
[ 5.869373] 3. Phy Mode = 9
[ 5.879092] MCS Set = ff 00 00 00 01
[ 5.889759] <==== rt28xx_init, Status=0
[ 5.891217] 0x1300 = 00064300
[ 6.419174] -->RTUSBVenderReset
[ 6.419306] <--RTUSBVenderReset
[ 6.695671] Key1Str is Invalid key length(0) or Type(0)
[ 6.695676] Key2Str is Invalid key length(0) or Type(0)
[ 6.695680] Key3Str is Invalid key length(0) or Type(0)
[ 6.695685] Key4Str is Invalid key length(0) or Type(0)
[ 6.695759] 1. Phy Mode = 5
[ 6.695760] 2. Phy Mode = 5
[ 6.729687] phy mode> Error! The chip does not support 5G band 5!
[ 6.729752] RTMPSetPhyMode channel is out of range, use first channel=1
[ 6.746270] 3. Phy Mode = 9
[ 6.755387] MCS Set = ff 00 00 00 01
[ 6.765922] <==== rt28xx_init, Status=0
[ 6.767377] 0x1300 = 00064300
[ 6.976428] xhci_hcd 00000014.0 WARN Event TRB for slot 1 ep 0 with no TDs queued?
[ 8.382755] phy0 -> rt2800_wait_wpdma_ready Error - WPDMA TX/RX busy [0x00000068].
[ 9.981452] phy0 -> rt2800_wait_wpdma_ready Error - WPDMA TX/RX busy [0x00000068].
[ 9.981455] phy0 -> rt2800pci_set_device_state Error - Device failed to enter state 4 (-5).
[ 9.982216] IPv6 ADDRCONF(NETDEV_UP) wlan1 link is not ready
[ 11.600179] phy0 -> rt2800_wait_wpdma_ready Error - WPDMA TX/RX busy [0x00000068].
[ 13.198865] phy0 -> rt2800_wait_wpdma_ready Error - WPDMA TX/RX busy [0x00000068].
[ 13.198871] phy0 -> rt2800pci_set_device_state Error - Device failed to enter state 4 (-5).
[ 14.813575] phy0 -> rt2800_wait_wpdma_ready Error - WPDMA TX/RX busy [0x00000068].
[ 16.412288] phy0 -> rt2800_wait_wpdma_ready Error - WPDMA TX/RX busy [0x00000068].
[ 16.412294] phy0 -> rt2800pci_set_device_state Error - Device failed to enter state 4 (-5).

What might be causing these errors? How do I help to triage the cause of the errors?

Please let me know if you need more info!

Thanks,
Pranith