[SOLVED] wpa_supplicant + rt73

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=4516

cyclon

25-12-2007 16:32:38

The latest version has support ralink wpa_supplicant. But there is a problem. When I run

wpa_supplicant -i wlan0 -c / etc / wpa_supplicant / wpa_supplicant.conf -d -d

I see this message at the first three launch

Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
wpa_driver_ralink_get_scan_results
Scan results 0
Selecting BSS from priority group 20
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request 0 sec 0 usec
Starting AP scan (broadcast SSID)
wpa_driver_ralink_scan
wpa_driver_ralink_scan_timeout
Scan timeout - try to get results
wpa_driver_ralink_get_scan_results
RALINK AP IEs - hexdump(len=36) c6 01 4a 4f 07 00 00 00 64 00 11 04 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
RALINK AP IEs - hexdump(len=66) 27 7e 16 68 3b 00 00 00 c8 00 31 04 dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
Scan results 2
Selecting BSS from priority group 20
Try to find WPA-enabled AP
0 001349e1cd07 ssid='ZyXEL-2790' wpa_ie_len=24 rsn_ie_len=0 caps=0x411
skip - SSID mismatch
1 00116b246c78 ssid='cyclon' wpa_ie_len=28 rsn_ie_len=26 caps=0x431
selected based on RSN IE
selected WPA AP 00116b246c78 ssid='cyclon'
Try to find non-WPA AP
Trying to associate with 00116b246c78 (SSID='cyclon' freq=2462 MHz)
Cancelling scan request
WPA clearing own WPA/RSN IE
Automatic auth_alg selection 0x1
RSN using IEEE 802.11i/D9.0
WPA Selected cipher suites group 8 pairwise 24 key_mgmt 2 proto 2
WPA set AP WPA IE - hexdump(len=28) dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA set AP RSN IE - hexdump(len=26) 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA using GTK TKIP
WPA using PTK CCMP
WPA using KEY_MGMT WPA-PSK
WPA Set own WPA IE default - hexdump(len=22) 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
State SCANNING -> ASSOCIATING
wpa_driver_ralink_associate
ralink_set_auth_mode
wpa_driver_ralink_set_ssid
Setting authentication timeout 10 sec 0 usec
EAPOL External notification - EAP success=0
EAPOL External notification - EAP fail=0
EAPOL External notification - portControl=Auto
RSN Ignored PMKID candidate without preauth flag
Authentication with 00116b246c78 timed out.
Added BSSID 00116b246c78 into blacklist
No keys have been configured - skip key clearing
State ASSOCIATING -> DISCONNECTED
EAPOL External notification - portEnabled=0
EAPOL External notification - portValid=0
EAPOL External notification - EAP success=0
Setting scan request 0 sec 0 usec
State DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
wpa_driver_ralink_scan
wpa_driver_ralink_scan_timeout
Scan timeout - try to get results
wpa_driver_ralink_get_scan_results
RALINK AP IEs - hexdump(len=36) 96 81 1e 50 07 00 00 00 64 00 11 04 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
RALINK AP IEs - hexdump(len=66) 0a 07 eb 68 3b 00 00 00 c8 00 31 04 dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
Scan results 2
Selecting BSS from priority group 20
Try to find WPA-enabled AP
0 001349e1cd07 ssid='ZyXEL-2790' wpa_ie_len=24 rsn_ie_len=0 caps=0x411
skip - SSID mismatch
1 00116b246c78 ssid='cyclon' wpa_ie_len=28 rsn_ie_len=26 caps=0x431
selected based on RSN IE
selected WPA AP 00116b246c78 ssid='cyclon'
Try to find non-WPA AP
Trying to associate with 00116b246c78 (SSID='cyclon' freq=2462 MHz)
Cancelling scan request
WPA clearing own WPA/RSN IE
Automatic auth_alg selection 0x1
RSN using IEEE 802.11i/D9.0
WPA Selected cipher suites group 8 pairwise 24 key_mgmt 2 proto 2
WPA set AP WPA IE - hexdump(len=28) dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA set AP RSN IE - hexdump(len=26) 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA using GTK TKIP
WPA using PTK CCMP
WPA using KEY_MGMT WPA-PSK
WPA Set own WPA IE default - hexdump(len=22) 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
State SCANNING -> ASSOCIATING
wpa_driver_ralink_associate
ralink_set_auth_mode
wpa_driver_ralink_set_ssid
Setting authentication timeout 10 sec 0 usec
EAPOL External notification - EAP success=0
EAPOL External notification - EAP fail=0
EAPOL External notification - portControl=Auto
RSN Ignored PMKID candidate without preauth flag


But for a fourth launch, usually triggered.

What to do?

Thanks in advance!

cyclon

26-12-2007 17:15:02

I found a way to resolve this problem. I just use wpa_supplicant-0.5.9 and drivers for ralink for it (from http//www.ralinktech.com.tw/data/RT73_ ... 4.0.tar.gz). With some modes by me.