USB RT73 wireless cannot connect

Live forum: http://rt2x00.serialmonkey.com/viewtopic.php?t=4517

coolone

26-12-2007 04:21:08

Gentoo 2007 64AMD

USB TL-WN321G
Bus 001 Device 004 ID 148f2573 Ralink Technology, Corp

i have compiled RT73 driver and installed successfully ( rt73.ko)

also emerged both wireless-tools & net-wireless/wpa_supplicant

[b1jvwmarc]
/etc/conf.d/net[/b1jvwmarc]

[code1jvwmarc]modules=("wpa_supplicant")
wpa_supplicant_wlan0="-Dwext"
config_wlan0=("10.1.1.14 netmask 255.0.0.0")
routes_wlan0=("default via 10.1.1.1")[/code1jvwmarc]


[b1jvwmarc]/etc/wpa_supplicant/wpa_supplicant.conf [/b1jvwmarc]

[code1jvwmarc]ctrl_interface=/var/run/wpa_supplicant

network={
ssid="My_ssid"
psk="Password"
key_mgmt=WPA-PSK
proto=WPA
}
[/code1jvwmarc]


but cannot get it on.

[b1jvwmarc]/etc/init.d/net.wlan0 restart[/b1jvwmarc]
[code1jvwmarc] * Stopping wlan0
* Bringing down wlan0
* Shutting down wlan0 ... [ ok ]
* Stopping wpa_cli on wlan0 ... [ ok ]
* Stopping wpa_supplicant on wlan0 ... [ ok ]
* Starting wlan0
* Starting wpa_supplicant on wlan0 ...
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported [ ok ]th param 5 value 0x1 -
* Starting wpa_cli on wlan0 ... [ ok ]
* Backgrounding ...[/code1jvwmarc]


[b1jvwmarc]wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf [/b1jvwmarc]


[code1jvwmarc]ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - ctrl_iface exists and seems to be in use - cannot override it
Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
Failed to initialize control interface '/var/run/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was
left by an unclean termination of wpa_supplicant in which case you will need
to manually remove this file before starting wpa_supplicant again.

ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - Segmentation fault
[/code1jvwmarc]
could someone help with this?
thanks a lot

cyclon

26-12-2007 06:18:48

wpa_supplicant-0.6.1 have support ralink driver (use -Dralink), but I have problem with it (I use wpa_supplicant for WPA2-Enterprise). With Rutilt WPA2PSK work fine.