Comping on Marvel arm9 orion platform

Live forum:


12-03-2009 15:50:54

For days now I am trying to compile the RT73 legacy drivers for the Orion board. Compilation (make arm) went well OK, however loading the driver gives me headaches
When loading the driver I see the following

rt73 Device Descriptor not matching
rt73 probe of 2-1.41.0 failed with error -12

I am pritty sure this card is supported
Bus 002 Device 005 ID 148f2573 Ralink Technology, Corp.
Bus 002 Device 002 ID 05e30608 Genesys Logic, Inc. USB-2.0 4-Port HUB

So I decided to add some "debug" information into the code, and this is the result

rt73 Probed idVendor = 0x1510 -- probed idProduct = 0xd380 -- Checked idVendor = 0x148f -- Checked idProduct 0x2573
Both idVendor and idProduct seem to change every time the stick is removed and inserted. It seems these values are randomly read.

Can this problem been caused by the USB hub mentioned above?
Or am I missing something here?

BTW I have got the Zidas driver compiled and running. For me an indication that the compiler environment is OK.