Hello,
I am running Debian 4.0 Etch, Kernelversion 2.6.18-5-486 with a wireless card Edimax EW-7128g . It works under Windows 2000 and
Code:
lspci
shows:
Code:
00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] (rev c3)
00:09.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871
00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
[b]00:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI[/b]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
So I
Code:
apt-get install rt2500-source
and some packages like linux-headers and compiled with
Code:
module-assistant prepare
module-assistant auto-install rt2500-source
as explained in the HOWTO.
To this point everything seems to be ok.
But now there is no interface:
Code:
ifconfig -a
shows:
Code:
eth0 Protokoll:Ethernet Hardware Adresse 00:02:44:7F:46:CF
inet Adresse:192.168.2.32 Bcast:192.168.2.255 Maske:255.255.255.0
inet6 Adresse: fe80::202:44ff:fe7f:46cf/64 G?ltigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1302 errors:0 dropped:0 overruns:0 frame:0
TX packets:1102 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl?nge:1000
RX bytes:1132021 (1.0 MiB) TX bytes:133885 (130.7 KiB)
Interrupt:12 Basisadresse:0xd000
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 G?ltigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl?nge:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sit0 Protokoll:IPv6-nach-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl?nge:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
I tried to
Code:
modprobe rt2500
, but this didn't help.
Thanks for help
Max
Login
Register
FAQ
Search
