rt2x00.serialmonkey.com

Support forum for the rt2x00 project
It is currently Sat Jul 31, 2010 3:14 am

View unanswered posts | View active topics


Board index » rt2x00 Driver Support » rt2x00 Driver Support

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
minimike
 Post subject: ad-hoc
PostPosted: Thu Jan 31, 2008 2:14 pm 
Offline

Joined: Thu Jan 31, 2008 1:49 pm
Posts: 2
Hi
Yesterday i installed the new 2.6.24 with the rt2x00 drivers. I have got an rt73 based USB-Stick, with the CVS rt43 drivers 2008012921 on 2.6.23 the Stick is working allmost fine :). I need Support für Ad-Hoc mode in my setup but it seems that doesn't work Ad-Hoc in 2.6.24 with all rt2x00 drivers. I tryed the rt73usb from Kernel first after them the rt73 from CVS. Currently it is not possible to set up an rt73 based wireless device with Ad-Hoc mode on a 2.6.24. The rt73 from daily CVS didn't put many Infos in dmesg but i have compiled the Kerneldrivers with the debuging option.

Here are the relevant messages of dmesg
Patches ore Help are allways welcome ;)

Code:
HW CONFIG: channel=1 freq=2412 phymode=2
HW CONFIG: channel=1 freq=2412 phymode=2
phy0 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<6>usbcore: deregistering interface driver rt73usb
phy1: Selected rate control algorithm 'simple'
usbcore: registered new interface driver rt73usb
HW CONFIG: channel=6 freq=2437 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=6 freq=2437 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>wlan0: sta_find_ibss (active_ibss=0)
   sta_find_ibss: selected 48:1c:40:24:01:81 current 00:00:00:00:00:00
   did not try to join ibss
wlan0: Trigger new scan to find an IBSS to join
HW CONFIG: channel=1 freq=2412 phymode=2
HW CONFIG: channel=1 freq=2412 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=2 freq=2417 phymode=2
HW CONFIG: channel=2 freq=2417 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=3 freq=2422 phymode=2
HW CONFIG: channel=4 freq=2427 phymode=2
HW CONFIG: channel=5 freq=2432 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
HW CONFIG: channel=7 freq=2442 phymode=2
HW CONFIG: channel=8 freq=2447 phymode=2
HW CONFIG: channel=9 freq=2452 phymode=2
HW CONFIG: channel=10 freq=2457 phymode=2
HW CONFIG: channel=11 freq=2462 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
wlan0: sta_find_ibss (active_ibss=0)
   sta_find_ibss: selected 00:20:09:36:01:81 current 00:00:00:00:00:00
   did not try to join ibss
wlan0: sta_find_ibss (active_ibss=0)
   sta_find_ibss: selected 48:dc:7a:2a:01:81 current 00:00:00:00:00:00
   did not try to join ibss
wlan0: Trigger new scan to find an IBSS to join
HW CONFIG: channel=1 freq=2412 phymode=2
HW CONFIG: channel=1 freq=2412 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=2 freq=2417 phymode=2
HW CONFIG: channel=2 freq=2417 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=3 freq=2422 phymode=2
HW CONFIG: channel=4 freq=2427 phymode=2
HW CONFIG: channel=5 freq=2432 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
HW CONFIG: channel=7 freq=2442 phymode=2
HW CONFIG: channel=8 freq=2447 phymode=2
HW CONFIG: channel=9 freq=2452 phymode=2
HW CONFIG: channel=10 freq=2457 phymode=2
HW CONFIG: channel=11 freq=2462 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
wlan0: sta_find_ibss (active_ibss=0)
   sta_find_ibss: selected 00:20:09:36:01:81 current 00:00:00:00:00:00
   did not try to join ibss
wlan0: sta_find_ibss (active_ibss=0)
   sta_find_ibss: selected 48:9c:5c:24:01:81 current 00:00:00:00:00:00
   did not try to join ibss
HW CONFIG: channel=6 freq=2437 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=6 freq=2437 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>wlan0: sta_find_ibss (active_ibss=0)
   sta_find_ibss: selected 48:fc:5e:24:01:81 current 00:00:00:00:00:00
   did not try to join ibss
HW CONFIG: channel=6 freq=2437 phymode=2
HW CONFIG: channel=6 freq=2437 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<7>HW CONFIG: channel=6 freq=2437 phymode=2
phy1 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode<6>usbcore: deregistering interface driver rt73usb
Top
 Profile  
 
IvD
 Post subject: Re: ad-hoc
PostPosted: Thu Jan 31, 2008 3:20 pm 
Offline
Site Admin

Joined: Sun Jun 05, 2005 1:01 pm
Posts: 5876
Location: Haarlem, The Netherlands
minimike wrote:
Code:
phy0 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or Master mode


I think this error messages says it all actually....

Adhoc and master mode are scheduled for 2.6.26

_________________
Regards,
Ivo van Doorn
Project Administrator
http://rt2x00.serialmonkey.com

Top
 Profile  
 
minimike
 Post subject:
PostPosted: Thu Jan 31, 2008 4:23 pm 
Offline

Joined: Thu Jan 31, 2008 1:49 pm
Posts: 2
but it's works with rt73 from CVS and Kernel 2.6.23. Bad news that we have to wait more then six month's for the relaise to 2.6.26 :(
Top
 Profile  
 
IvD
 Post subject:
PostPosted: Thu Jan 31, 2008 4:46 pm 
Offline
Site Admin

Joined: Sun Jun 05, 2005 1:01 pm
Posts: 5876
Location: Haarlem, The Netherlands
minimike wrote:
but it's works with rt73 from CVS and Kernel 2.6.23. Bad news that we have to wait more then six month's for the relaise to 2.6.26 :(


Well there is a resource shortage in this project...
If rt73 legacy works for you then use that untill rt2x00 2.1.0 is released. You could also try the rt2x00.git version which has adhoc and master mode enabled again, I just don't give a guarentee that it is actually working...

_________________
Regards,
Ivo van Doorn
Project Administrator
http://rt2x00.serialmonkey.com

Top
 Profile  
 
AdamBaker
 Post subject:
PostPosted: Thu Jan 31, 2008 9:33 pm 
Offline

Joined: Wed May 17, 2006 10:03 pm
Posts: 262
I'd go further than that and say that I guarantee ad-hoc isn't working correctly for rt73. It will probably appear to work if at least one of the devices in your ad-hoc network isn't an rt73 but it won't comply with the spec.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » rt2x00 Driver Support » rt2x00 Driver Support

All times are UTC


Who is online

Users browsing this forum: Yahoo [Bot] and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group