[rt2x00-users] [PATCH] rt2x00: Fix and fine-tune rf registers for rt2800_init_rfcsr
RA-Jay Hung
Jay_Hung at ralinktech.com
Tue Dec 28 21:23:43 EST 2010
Basically fix and fine-tune RT3070/RT3071/RT3090 chip RF initial value
when call rt2800_init_rfcsr
Signed-off-by: RA-Jay Hung <jay_hung at ralinktech.com>
---
drivers/net/wireless/rt2x00/rt2800.h | 6 ++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 25 +++++++++++++++++--------
2 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 435266c..922114c 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1807,6 +1807,12 @@ struct mac_iveiv_entry {
#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
/*
+ * RFCSR 31:
+ */
+#define RFCSR31_RX_AGC_FC FIELD8(0x1f)
+#define RFCSR31_RX_H20M FIELD8(0x20)
+
+/*
* RF registers
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 62db2c5..a54376c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2429,6 +2429,9 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
rt2800_bbp_write(rt2x00dev, 4, bbp);
+ rt2800_rfcsr_read(rt2x00dev, 31, &bbp);
+ rt2x00_set_field8(&bbp, RFCSR31_RX_H20M, bw40);
+
rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
@@ -2503,7 +2506,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
+ rt2800_rfcsr_write(rt2x00dev, 7, 0x60);
rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
@@ -2595,16 +2598,17 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090)) {
+ rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
+
rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
- rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
-
rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
+ rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
@@ -2612,6 +2616,10 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
}
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+
+ rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®);
+ rt2x00_set_field32(®, GPIO_SWITCH_5, 0);
+ rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
} else if (rt2x00_rt(rt2x00dev, RT3390)) {
rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®);
rt2x00_set_field32(®, GPIO_SWITCH_5, 0);
@@ -2663,10 +2671,11 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
- if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
+ if (rt2x00_rt(rt2x00dev, RT3070) ||
+ rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
@@ -2679,6 +2688,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rt(rt2x00dev, RT3090)) {
rt2800_bbp_read(rt2x00dev, 138, &bbp);
+ /* Turn off unused DAC1 and ADC1 to reduce power consumption */
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
@@ -2712,10 +2722,9 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
}
- if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071)) {
+ if (rt2x00_rt(rt2x00dev, RT3070)) {
rt2800_rfcsr_read(rt2x00dev, 27, &rfcsr);
- if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
- rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E))
+ if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F))
rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3);
else
rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0);
--
1.7.1
CONFIDENTIALITY STATEMENT : The information, attachments and any rights attaching in this e-mail are confidential and privileged; it is intended only for the individual or entity named as the recipient hereof.Any disclosure, copying, distribution, dissemination or use of the contents of this e-mail by persons other than the intended recipient is STRICTLY PROHIBITED and may violate applicable laws.If you have received this e-mail in error, please delete the original message and notify us by return email or collect call immediately. Thank you.
More information about the users
mailing list