[rt2x00-users] Indirect register access failed

[Antonio Quartulli]

On ven, lug 02, 2010 at 07:45:25 +0200, Helmut Schaa wrote:
> > > > > > > > > Jun 18 21:54:57 eagle3 kernel: [   96.206662] phy0: device no longeridle - scanning
> > > > > > > > > Jun 18 21:54:58 eagle3 kernel: [   97.161141] wlan0: direct probe to 00:22:3f:03:81:dd (try 1)
> > > > > > > > > Jun 18 21:54:58 eagle3 kernel: [   97.361146] wlan0: direct probe to 00:22:3f:03:81:dd (try 2)
> > > > > > > > > Jun 18 21:54:58 eagle3 kernel: [   97.561100] wlan0: direct probe to 00:22:3f:03:81:dd (try 3)
> > > > > > > > > Jun 18 21:54:59 eagle3 kernel: [   97.761324] wlan0: direct probe to 00:22:3f:03:81:dd timed out
> > > > > > > > > Jun 18 21:54:59 eagle3 kernel: [   97.766249] phy0: device now idle
> 

Hi all,
I'm actually re-testing the last rt2x00.git kernel (which is 2.6.34) on my EEEPC 901 and 
no error is appearing and the card is working properly with a WPA2 access point.
The only problem is that the signal level is appearing as positive value.

The card is: 
[   26.904398] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2872, rf: 0003, rev: 0200.

Regards,
Antonio

> 
> Helmut