[rt2x00-users] [PATCH2/4] rt2x00: Add chip ID/register definitions for RT5390

[RA-Shiang Tu]

Add chip ID/register related definitions for RT5390 chip

Signed-off-by: Shiang Tu <shiang_tu at ralinktech.com>
---
 drivers/net/wireless/rt2x00/rt2800.h |   38 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2x00.h |    2 +
 2 files changed, 40 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 457887c..626e45b 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -51,6 +51,7 @@
  * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
  * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
  * RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5390 2.4G 1T1R
  */
 #define RF2820                         0x0001
 #define RF2850                         0x0002
@@ -65,6 +66,7 @@
 #define RF3320                         0x000b
 #define RF3322                         0x000c
 #define RF3853                         0x000d
+#define RF5390                         0x5390

 /*
  * Chipset revisions.
@@ -77,6 +79,7 @@
 #define REV_RT3071E                    0x0211
 #define REV_RT3090E                    0x0211
 #define REV_RT3390E                    0x0211
+#define REV_RT5390F                    0x0502

 /*
  * Signal information.
@@ -121,6 +124,13 @@
 #define E2PROM_CSR_RELOAD              FIELD32(0x00000080)

 /*
+ * AUX_CTRL: Aux/PCI-E related configuration
+ */
+#define AUX_CTRL               0x10c
+#define AUX_CTRL_WAKE_PCIE_EN          FIELD32(0x00000002)
+#define AUX_CTRL_FORCE_PCIE_CLK        FIELD32(0x00000400)
+
+/*
  * OPT_14: Unknown register used by rt3xxx devices.
  */
 #define OPT_14_CSR                     0x0114
@@ -1724,6 +1734,13 @@ struct mac_iveiv_entry {
  */
 #define BBP4_TX_BF                     FIELD8(0x01)
 #define BBP4_BANDWIDTH                 FIELD8(0x18)
+#define BBP4_MAC_IF_CTRL               FIELD8(0x40)
+
+/*
+ * BBP 109
+ */
+#define BBP109_TX0_POWER       FIELD8(0x0f)
+#define BBP109_Tx1_POWER       FIELD8(0xf0)

 /*
  * BBP 138: Unknown
@@ -1748,6 +1765,11 @@ struct mac_iveiv_entry {
 #define RFCSR1_TX1_PD                  FIELD8(0x20)

 /*
+ * RFCSR 2:
+ */
+#define RFCSR2_RESCAL_EN               FIELD8(0x80)
+
+/*
  * RFCSR 6:
  */
 #define RFCSR6_R1                      FIELD8(0x03)
@@ -1811,6 +1833,7 @@ struct mac_iveiv_entry {
 /*
  * RFCSR 30:
  */
+#define RFCSR30_RX_VCM         FIELD8(0x18)
 #define RFCSR30_RF_CALIBRATION         FIELD8(0x80)

 /*
@@ -1820,6 +1843,16 @@ struct mac_iveiv_entry {
 #define RFCSR31_RX_H20M                        FIELD8(0x20)

 /*
+ * RFCSR 38:
+ */
+#define RFCSR38_RX_LO1_EN      FIELD8(0x20)
+
+/*
+ * RFCSR 39:
+ */
+#define RFCSR39_RX_LO2_EN      FIELD8(0x80)
+
+/*
  * RF registers
  */

@@ -1852,6 +1885,11 @@ struct mac_iveiv_entry {
  */

 /*
+ * Chip ID
+ */
+#define EEPROM_CHIP_ID         0x0000
+
+/*
  * EEPROM Version
  */
 #define EEPROM_VERSION                 0x0001
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 64c6ef5..aaa0cdb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -189,6 +189,7 @@ struct rt2x00_chip {
 #define RT3572         0x3572
 #define RT3593         0x3593  /* PCIe */
 #define RT3883         0x3883  /* WSOC */
+#define RT5390         0x5390  /* 2.4GHz */

        u16 rf;
        u16 rev;
@@ -668,6 +669,7 @@ enum rt2x00_flags {
        CONFIG_SUPPORT_HW_BUTTON,
        CONFIG_SUPPORT_HW_CRYPTO,
        CONFIG_SUPPORT_POWER_LIMIT,
+       CONFIG_SUPPORT_BT_COEXIST,
        DRIVER_SUPPORT_CONTROL_FILTERS,
        DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
        DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,
--
1.7.1
CONFIDENTIALITY STATEMENT : The information, attachments and any rights attaching in this e-mail are confidential and privileged; it is intended only for the individual or entity named as the recipient hereof.Any disclosure, copying, distribution, dissemination or use of the contents of this e-mail by persons other than the intended recipient is STRICTLY PROHIBITED and may violate applicable laws.If you have received this e-mail in error, please delete the original message and notify us by return email or collect call immediately. Thank you.