January 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Jan 1 21:28:17 EST 2011
Ending: Mon Jan 31 22:05:00 EST 2011
Messages: 240

• [rt2x00-users] BUG in rt2x00lib_txdone() with 2.6.37-rc8   Michele Ballabio
• [rt2x00-users] [PATCH] cfg80211: Extend channel to frequency mapping for 802.11j   Johannes Berg
• [rt2x00-users] BUG in rt2x00lib_txdone() with 2.6.37-rc8   Stephen Boyd
• [rt2x00-users] [PATCH 2] cfg80211: Extend channel to frequency mapping for 802.11j   Luciano Coelho
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Luis Correia
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Luis Correia
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Luis Correia
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Luis Correia
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Luis Correia
• [rt2x00-users] rt73usb cause system to crash after resuming from suspend   Luis Correia
• [rt2x00-users] BUG in rt2x00lib_txdone() with 2.6.37-rc8   Heinz Diehl
• [rt2x00-users] [PATCH v2] rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090   Ivo Van Doorn
• [rt2x00-users] [PATCH] rt2x00: Fix rt2800 twpower setting to correct value   Ivo Van Doorn
• [rt2x00-users] TP-LINK WN7200ND cannot associate to any access point   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH] rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware()   Ivo Van Doorn
• [rt2x00-users] [PATCH 00/12] Beacon refactoring for multiple interfaces and tasklet conversion   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 2/3] rt2x00: Correct initial value of US_CYC_CNT register for pcie interface   Ivo Van Doorn
• [rt2x00-users] [PATCH] rt2x00: Update MAINTAINERS   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Ivo Van Doorn
• [rt2x00-users] [PATCH] Trivial typo fix in comment   Ivo Van Doorn
• [rt2x00-users] [PATCH] rt2x00: trivial: add \n to WARNING message   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] rt2x00: WPA2-TKIP fixes.   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Ivo Van Doorn
• [rt2x00-users] [PATCH] Move TX/RX work into dedicated workqueue   Ivo Van Doorn
• [rt2x00-users] [PATCH] rt2x00: add device id for windy31 usb device   Ivo Van Doorn
• [rt2x00-users] [PATCH] Move TX/RX work into dedicated workqueue   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Ivo Van Doorn
• [rt2x00-users] [PATCH] rt2800usb: follow rt2x00 TX/RX workqueue changes   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Ivo Van Doorn
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Ivo Van Doorn
• [rt2x00-users] [PATCH 1/2] rt2x00: Fix radio off hang issue for PCIE interface   Ivo van Doorn
• [rt2x00-users] [PATCH 2/2] rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090   Ivo van Doorn
• [rt2x00-users] [PATCH] Move TX/RX work into dedicated workqueue   Ivo van Doorn
• [rt2x00-users] [PATCH] Kill all tasklets during device removal   Ivo van Doorn
• [rt2x00-users] [PATCH 01/21] rt2x00: Refactor beacon code to make use of start- and stop_queue   Ivo van Doorn
• [rt2x00-users] [PATCH 02/21] rt2x00: Introduce beacon_update_locked that requires caller locking   Ivo van Doorn
• [rt2x00-users] [PATCH 03/21] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Ivo van Doorn
• [rt2x00-users] [PATCH 04/21] rt2x00: Make periodic beacon updates for PCI devices atomic   Ivo van Doorn
• [rt2x00-users] [PATCH 05/21] rt2x00: Introduce tasklets for interrupt handling   Ivo van Doorn
• [rt2x00-users] [PATCH 06/21] rt2x00: Disable txstatus tasklet by default   Ivo van Doorn
• [rt2x00-users] [PATCH 07/21] rt2x00: Convert rt2800pci to use tasklets   Ivo van Doorn
• [rt2x00-users] [PATCH 08/21] rt2x00: Convert rt61pci to use tasklets   Ivo van Doorn
• [rt2x00-users] [PATCH 09/21] rt2x00: Convert rt2500pci interrupt handling to use tasklets   Ivo van Doorn
• [rt2x00-users] [PATCH 10/21] rt2x00: Convert rt2400pci interrupt handling to use tasklets   Ivo van Doorn
• [rt2x00-users] [PATCH 11/21] rt2x00: Remove interrupt thread registration   Ivo van Doorn
• [rt2x00-users] [PATCH 12/21] rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR   Ivo van Doorn
• [rt2x00-users] [PATCH 13/21] rt2x00: Correct initial value of US_CYC_CNT register for pcie interface   Ivo van Doorn
• [rt2x00-users] [PATCH 14/21] rt2x00: Update MAINTAINERS   Ivo van Doorn
• [rt2x00-users] [PATCH 15/21] Trivial typo fix in comment   Ivo van Doorn
• [rt2x00-users] [PATCH 16/21] rt2x00: trivial: add \n to WARNING message   Ivo van Doorn
• [rt2x00-users] [PATCH 17/21] rt2x00: Fix WPA TKIP Michael MIC failures.   Ivo van Doorn
• [rt2x00-users] [PATCH 18/21] rt2x00: Copy the MAC address to the WCID entry properly.   Ivo van Doorn
• [rt2x00-users] [PATCH 19/21] rt2x00: Fix FIXME comments in rt61pci and rt73usb on Michael MIC.   Ivo van Doorn
• [rt2x00-users] [PATCH 20/21] rt2x00: Kill all tasklets during device removal   Ivo van Doorn
• [rt2x00-users] [PATCH 21/21] rt2x00: Move TX/RX work into dedicated workqueue   Ivo van Doorn
• [rt2x00-users] [PATCH] Trivial typo fix in comment   Mark Einon
• [rt2x00-users] [PATCH] rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware()   Pekka Enberg
• [rt2x00-users] [PATCH] rt2x00: Fix rt2800 twpower setting to correct value   RA-Jay Hung
• [rt2x00-users] [PATCH] rt2x00: Fix rt2800 twpower setting to correct value   RA-Jay Hung
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   RA-Jay Hung
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   RA-Jay Hung
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   RA-Jay Hung
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   RA-Jay Hung
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   RA-Jay Hung
• [rt2x00-users] [PATCH v2 1/2] rt2x00: Fix rt2800 txpower setting to correct value   RA-Jay Hung
• [rt2x00-users] [PATCH v2 2/2] rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna diversity support   RA-Jay Hung
• [rt2x00-users] [PATCH v2 1/2] rt2x00: Fix rt2800 txpower setting to correct value   RA-Jay Hung
• [rt2x00-users] [PATCH v2 2/2] rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna diversity support   RA-Jay Hung
• [rt2x00-users] [PATCH] rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware()   Jesper Juhl
• [rt2x00-users] [PATCH] rt2x00: add device id for windy31 usb device   Greg KH
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Wolfgang Kufner
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Wolfgang Kufner
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Wolfgang Kufner
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Wolfgang Kufner
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Wolfgang Kufner
• [rt2x00-users] [PATCH] rt2x00: Fix disconnect in power save mode regression.   Wolfgang Kufner
• [rt2x00-users] [PATCH] rt2x00: Fix disconnect in power save mode regression.   Wolfgang Kufner
• [rt2x00-users] [PATCH] rt2x00: Fix disconnect in power save mode regression.   Wolfgang Kufner
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Jouni Malinen
• [rt2x00-users] rt73usb cause system to crash after resuming from suspend   Leonardo Luiz Padovani da Mata
• [rt2x00-users] rt73usb cause system to crash after resuming from suspend   Leonardo Luiz Padovani da Mata
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Aleksandar Milivojevic
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Aleksandar Milivojevic
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Aleksandar Milivojevic
• [rt2x00-users] [PATCH] cfg80211: Extend channel to frequency mapping for 802.11j   Brian Prodoehl
• [rt2x00-users] [PATCH 2] cfg80211: Extend channel to frequency mapping for 802.11j   Brian Prodoehl
• [rt2x00-users] [PATCH] cfg80211: Extend channel to frequency mapping for 802.11j   Bruno Randolf
• [rt2x00-users] [PATCH 2] cfg80211: Extend channel to frequency mapping for 802.11j   Bruno Randolf
• [rt2x00-users] RT2860 802.11n   Hasan Rashid
• [rt2x00-users] RT2860 802.11n   Hasan Rashid
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Luis R. Rodriguez
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Luis R. Rodriguez
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Luis R. Rodriguez
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Helmut Schaa
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Helmut Schaa
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Helmut Schaa
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Helmut Schaa
• [rt2x00-users] [RFC/RFT 00/15] Beaconing updates and tasklet conversion   Helmut Schaa
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Helmut Schaa
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Helmut Schaa
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Helmut Schaa
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Helmut Schaa
• [rt2x00-users] [PATCH RFC] rt2800usb: TX_STA_FIFO read timer   Helmut Schaa
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Helmut Schaa
• [rt2x00-users] [PATCH 00/12] Beacon refactoring for multiple interfaces and tasklet conversion   Helmut Schaa
• [rt2x00-users] [PATCH 01/12] rt2x00: Refactor beacon code to make use of start- and stop_queue   Helmut Schaa
• [rt2x00-users] [PATCH 02/12] rt2x00: Introduce beacon_update_locked that requires caller locking   Helmut Schaa
• [rt2x00-users] [PATCH 03/12] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Helmut Schaa
• [rt2x00-users] [PATCH 04/12] rt2x00: Make periodic beacon updates for PCI devices atomic   Helmut Schaa
• [rt2x00-users] [PATCH 05/12] rt2x00: Introduce tasklets for interrupt handling   Helmut Schaa
• [rt2x00-users] [PATCH 06/12] rt2x00: Disable txstatus tasklet by default   Helmut Schaa
• [rt2x00-users] [PATCH 07/12] rt2x00: Convert rt2800pci to use tasklets   Helmut Schaa
• [rt2x00-users] [PATCH 08/12] rt2x00: Convert rt61pci to use tasklets   Helmut Schaa
• [rt2x00-users] [PATCH 09/12] rt2x00: Convert rt2500pci interrupt handling to use tasklets   Helmut Schaa
• [rt2x00-users] [PATCH 10/12] rt2x00: Convert rt2400pci interrupt handling to use tasklets   Helmut Schaa
• [rt2x00-users] [PATCH 11/12] rt2x00: Remove interrupt thread registration   Helmut Schaa
• [rt2x00-users] [PATCH 12/12] rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR   Helmut Schaa
• [rt2x00-users] [PATCH 03/12] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Helmut Schaa
• [rt2x00-users] [PATCH 05/12] rt2x00: Introduce tasklets for interrupt handling   Helmut Schaa
• [rt2x00-users] [PATCH 03/12] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Helmut Schaa
• [rt2x00-users] [PATCH 00/12] Beacon refactoring for multiple interfaces and tasklet conversion   Helmut Schaa
• [rt2x00-users] rt2860 powersave leads to Error - Arrived at non-free entry in the non-full queue 0   Helmut Schaa
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   Helmut Schaa
• [rt2x00-users] [PATCH 2/3] rt2x00: Correct initial value of US_CYC_CNT register for pcie interface   Helmut Schaa
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   Helmut Schaa
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   Helmut Schaa
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   Helmut Schaa
• [rt2x00-users] [PATCH] rt2x00: Update MAINTAINERS   Helmut Schaa
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   Helmut Schaa
• [rt2x00-users] RT2860 802.11n   Helmut Schaa
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Helmut Schaa
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Helmut Schaa
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Helmut Schaa
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Helmut Schaa
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Helmut Schaa
• [rt2x00-users] rt2800usb: Michael MIC failure?   Helmut Schaa
• [rt2x00-users] rt2800usb: Michael MIC failure?   Helmut Schaa
• [rt2x00-users] [PATCH] Kill all tasklets during device removal   Helmut Schaa
• [rt2x00-users] [PATCH v2 1/2] rt2x00: Fix rt2800 txpower setting to correct value   Helmut Schaa
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Helmut Schaa
• [rt2x00-users] [RFC/RFT 00/15] Beaconing updates and tasklet conversion   Johannes Stezenbach
• [rt2x00-users] [RFC/RFT 00/15] Beaconing updates and tasklet conversion   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH 1/3] rt2x00: fix queue timeout checks   Johannes Stezenbach
• [rt2x00-users] [PATCH 2/3] rt2800usb: handle TX status timeouts   Johannes Stezenbach
• [rt2x00-users] [PATCH 3/3] rt2800usb: add timer to handle TX_STA_FIFO   Johannes Stezenbach
• [rt2x00-users] [PATCH 03/12] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Johannes Stezenbach
• [rt2x00-users] [PATCH 00/12] Beacon refactoring for multiple interfaces and tasklet conversion   Johannes Stezenbach
• [rt2x00-users] [PATCH 03/12] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH] rt2x00: Fix disconnect in power save mode regression.   Johannes Stezenbach
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH] rt2x00: Fix disconnect in power save mode regression.   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] [PATCH] rt2x00: trivial: add \n to WARNING message   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] rt2800pci failure with recent rt2x00-compat package   Johannes Stezenbach
• [rt2x00-users] [PATCH 0/3] rt2800usb: TX_STA_FIFO read timer   Johannes Stezenbach
• [rt2x00-users] rt2800usb: Michael MIC failure?   Johannes Stezenbach
• [rt2x00-users] rt2800usb: Michael MIC failure?   Johannes Stezenbach
• [rt2x00-users] rt2800usb: Michael MIC failure?   Johannes Stezenbach
• [rt2x00-users] rt2800usb: Michael MIC failure?   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH] Move TX/RX work into dedicated workqueue   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH] rt2800usb: follow rt2x00 TX/RX workqueue changes   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] [PATCH RFC] rt2800: disable powersaving as default   Johannes Stezenbach
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Peter Stuge
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Peter Stuge
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Denilson Figueiredo de Sá
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Denilson Figueiredo de Sá
• [rt2x00-users] rt61pci using hostapd has stopped receiving packets when using WPA   Denilson Figueiredo de Sá
• [rt2x00-users] TP-LINK WN7200ND cannot associate to any access point   Ming-Ching Tiew
• [rt2x00-users] [PATCH] cfg80211: Extend channel to frequency mapping for 802.11j   Dan Williams
• [rt2x00-users] Linksys WUSB600N v1 disconnecting from AP   Gertjan van Wingerde
• [rt2x00-users] [PATCH 01/12] rt2x00: Refactor beacon code to make use of start- and stop_queue   Gertjan van Wingerde
• [rt2x00-users] [PATCH 02/12] rt2x00: Introduce beacon_update_locked that requires caller locking   Gertjan van Wingerde
• [rt2x00-users] [PATCH 03/12] rt2x00: Limit beacon updates in bss_info_changed to USB devices   Gertjan van Wingerde
• [rt2x00-users] [PATCH 04/12] rt2x00: Make periodic beacon updates for PCI devices atomic   Gertjan van Wingerde
• [rt2x00-users] [PATCH 05/12] rt2x00: Introduce tasklets for interrupt handling   Gertjan van Wingerde
• [rt2x00-users] [PATCH 06/12] rt2x00: Disable txstatus tasklet by default   Gertjan van Wingerde
• [rt2x00-users] [PATCH 07/12] rt2x00: Convert rt2800pci to use tasklets   Gertjan van Wingerde
• [rt2x00-users] [PATCH 08/12] rt2x00: Convert rt61pci to use tasklets   Gertjan van Wingerde
• [rt2x00-users] [PATCH 09/12] rt2x00: Convert rt2500pci interrupt handling to use tasklets   Gertjan van Wingerde
• [rt2x00-users] [PATCH 10/12] rt2x00: Convert rt2400pci interrupt handling to use tasklets   Gertjan van Wingerde
• [rt2x00-users] [PATCH 11/12] rt2x00: Remove interrupt thread registration   Gertjan van Wingerde
• [rt2x00-users] [PATCH 12/12] rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR   Gertjan van Wingerde
• [rt2x00-users] [PATCH 05/12] rt2x00: Introduce tasklets for interrupt handling   Gertjan van Wingerde
• [rt2x00-users] [PATCH 00/12] Beacon refactoring for multiple interfaces and tasklet conversion   Gertjan van Wingerde
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   Gertjan van Wingerde
• [rt2x00-users] [PATCH] Trivial typo fix in comment   Gertjan van Wingerde
• [rt2x00-users] [PATCH] rt2x00: trivial: add \n to WARNING message   Gertjan van Wingerde
• [rt2x00-users] rt2800usb: Michael MIC failure?   Gertjan van Wingerde
• [rt2x00-users] rt2800usb: Michael MIC failure?   Gertjan van Wingerde
• [rt2x00-users] [PATCH 0/3] rt2x00: WPA2-TKIP fixes.   Gertjan van Wingerde
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix WPA TKIP Michael MIC failures.   Gertjan van Wingerde
• [rt2x00-users] [PATCH 2/3] rt2x00: Copy the MAC address to the WCID entry properly.   Gertjan van Wingerde
• [rt2x00-users] [PATCH 3/3] rt2x00: Fix FIXME comments in rt61pci and rt73usb on Michael MIC.   Gertjan van Wingerde
• [rt2x00-users] [PATCH] Kill all tasklets during device removal   Gertjan van Wingerde
• [rt2x00-users] [PATCH] Move TX/RX work into dedicated workqueue   Gertjan van Wingerde
• [rt2x00-users] [PATCH] Move TX/RX work into dedicated workqueue   Gertjan van Wingerde
• [rt2x00-users] [PATCH 1/3] rt2x00: Fix rt2800 txpower setting to correct value   Jay_Hung at ralinktech.com
• [rt2x00-users] [PATCH 2/3] rt2x00: Correct initial value of US_CYC_CNT register for pcie interface   Jay_Hung at ralinktech.com
• [rt2x00-users] [PATCH 3/3] rt2x00: Add antenna setting for RT3070/RT3090 with RX antenna diversity support   Jay_Hung at ralinktech.com

Last message date: Mon Jan 31 22:05:00 EST 2011
Archived on: Mon Jan 31 22:06:33 EST 2011

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...