[rt2x00-users] [PATCH 2/3] rt2x00: Don't use queue entry as parameter when creating TX descriptor.
Helmut Schaa
helmut.schaa at googlemail.com
Mon May 30 20:42:08 EST 2011
Am Samstag, 28. Mai 2011 schrieb Gertjan van Wingerde:
> The functions that create the tx descriptor structure do not operate on
> a queue entry at all. Signal this fact in the code by not providing a
> queue entry as a parameter, but the rt2x00 device structure and the skb
> directly.
>
> This patch is a preparation for reducing the time a queue is locked for
> a tx operation.
>
> Signed-off-by: Gertjan van Wingerde <gwingerde at gmail.com>
Looks good to me.
Acked-by: Helmut Schaa <helmut.schaa at googlemail.com>
>
> 3 files changed, 33 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
> index e1e0c51..f16518a 100644
> --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
> +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
> @@ -45,11 +45,11 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
> }
> }
>
> -void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
> +void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
> + struct sk_buff *skb,
> struct txentry_desc *txdesc)
> {
> - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
> - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
> + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
> struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
>
> if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags) || !hw_key)
> diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
> index 322cc4f..15cdc7e 100644
> --- a/drivers/net/wireless/rt2x00/rt2x00lib.h
> +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
> @@ -336,7 +336,8 @@ static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
> */
> #ifdef CONFIG_RT2X00_LIB_CRYPTO
> enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
> -void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
> +void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
> + struct sk_buff *skb,
> struct txentry_desc *txdesc);
> unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
> struct sk_buff *skb);
> diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
> index 2ace0f9..786e2d9 100644
> --- a/drivers/net/wireless/rt2x00/rt2x00queue.c
> +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
> @@ -200,11 +200,12 @@ void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
> skb_pull(skb, l2pad);
> }
>
> -static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
> +static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
> + struct sk_buff *skb,
> struct txentry_desc *txdesc)
> {
> - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
> - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
> + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
> + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
> struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
>
> if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
> @@ -212,7 +213,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
>
> __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
>
> - if (!test_bit(REQUIRE_SW_SEQNO, &entry->queue->rt2x00dev->cap_flags))
> + if (!test_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags))
> return;
>
> /*
> @@ -237,12 +238,12 @@ static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
>
> }
>
> -static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
> +static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,
> + struct sk_buff *skb,
> struct txentry_desc *txdesc,
> const struct rt2x00_rate *hwrate)
> {
> - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
> - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
> + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
> struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
> unsigned int data_length;
> unsigned int duration;
> @@ -259,8 +260,8 @@ static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
> txdesc->u.plcp.ifs = IFS_SIFS;
>
> /* Data length + CRC + Crypto overhead (IV/EIV/ICV/MIC) */
> - data_length = entry->skb->len + 4;
> - data_length += rt2x00crypto_tx_overhead(rt2x00dev, entry->skb);
> + data_length = skb->len + 4;
> + data_length += rt2x00crypto_tx_overhead(rt2x00dev, skb);
>
> /*
> * PLCP setup
> @@ -301,13 +302,14 @@ static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
> }
> }
>
> -static void rt2x00queue_create_tx_descriptor_ht(struct queue_entry *entry,
> +static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
> + struct sk_buff *skb,
> struct txentry_desc *txdesc,
> const struct rt2x00_rate *hwrate)
> {
> - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
> + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
> struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
> - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
> + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
>
> if (tx_info->control.sta)
> txdesc->u.ht.mpdu_density =
> @@ -380,12 +382,12 @@ static void rt2x00queue_create_tx_descriptor_ht(struct queue_entry *entry,
> txdesc->u.ht.txop = TXOP_HTTXOP;
> }
>
> -static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
> +static void rt2x00queue_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
> + struct sk_buff *skb,
> struct txentry_desc *txdesc)
> {
> - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
> - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
> - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
> + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
> + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
> struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
> struct ieee80211_rate *rate;
> const struct rt2x00_rate *hwrate = NULL;
> @@ -395,8 +397,8 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
> /*
> * Header and frame information.
> */
> - txdesc->length = entry->skb->len;
> - txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
> + txdesc->length = skb->len;
> + txdesc->header_length = ieee80211_get_hdrlen_from_skb(skb);
>
> /*
> * Check whether this frame is to be acked.
> @@ -471,13 +473,15 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
> /*
> * Apply TX descriptor handling by components
> */
> - rt2x00crypto_create_tx_descriptor(entry, txdesc);
> - rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
> + rt2x00crypto_create_tx_descriptor(rt2x00dev, skb, txdesc);
> + rt2x00queue_create_tx_descriptor_seq(rt2x00dev, skb, txdesc);
>
> if (test_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags))
> - rt2x00queue_create_tx_descriptor_ht(entry, txdesc, hwrate);
> + rt2x00queue_create_tx_descriptor_ht(rt2x00dev, skb, txdesc,
> + hwrate);
> else
> - rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
> + rt2x00queue_create_tx_descriptor_plcp(rt2x00dev, skb, txdesc,
> + hwrate);
> }
>
> static int rt2x00queue_write_tx_data(struct queue_entry *entry,
> @@ -588,7 +592,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
> * for our information.
> */
> entry->skb = skb;
> - rt2x00queue_create_tx_descriptor(entry, &txdesc);
> + rt2x00queue_create_tx_descriptor(queue->rt2x00dev, skb, &txdesc);
>
> /*
> * All information is retrieved from the skb->cb array,
> @@ -707,7 +711,7 @@ int rt2x00queue_update_beacon_locked(struct rt2x00_dev *rt2x00dev,
> * after that we are free to use the skb->cb array
> * for our information.
> */
> - rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
> + rt2x00queue_create_tx_descriptor(rt2x00dev, intf->beacon->skb, &txdesc);
>
> /*
> * Fill in skb descriptor
>
More information about the users
mailing list