[rt2x00-users] [RFC/RFT 3/4] rt2800: radio 3xxx: add channel switch calibration routines

[Stanislaw Gruszka]

Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 67b5ca6..506d691 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1674,6 +1674,14 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 		rfcsr |= 0x10;
 	rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
 
+	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+
 	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
 	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
@@ -1684,6 +1692,13 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 	rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
 	rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
 }
 
 static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
-- 
1.7.1