[rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver
andihartmann at 01019freenet.de
Wed Jan 25 03:12:57 EST 2012
Stanislaw Gruszka schrieb:
> Hi Gertjan
> On Tue, Jan 24, 2012 at 04:08:16PM +0100, Gertjan van Wingerde wrote:
>> Can you elaborate on what version of the Ralink driver you have
>> aligned the rt2x00 code?
> I'm using this tarball:
> I based mostly on chips/rt33xx.c file, I plan integrate code from
> other files i.e. chips/rt30xx.c, etc.
Ok, because your changes are based on these chips, you've done well
according my tests: nothing changed for me!
Device: rt2860 pci,
Firmware: rt2860.bin - 0.34.
SW: compat-wireless-3.3-rc1-2, kernel 3.1.4 64bit smp, 2
Patchsets from Jakub Kicinski, this patchset, mac80211:
revert: retry sending failed BAR frames later instead
of tearing down aggr, correct beaconing patch
-> no change in functionality!
Device: rt3572 usb device
Firmware: rt2870.bin - 0.236
SW: compat-wireless-3.3-rc1-2, kernel 220.127.116.11 32bit, 2
Patchsets from Jakub Kicinski, this patchset
-> no change in functionality - unusable as before :-(
More information about the users