January 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Jan 4 05:51:00 EST 2012
Ending: Tue Jan 31 19:36:26 EST 2012
Messages: 159

• [rt2x00-users] About rt2x00 Project   Chen-Yang Li (黎振陽)
• [rt2x00-users] About rt2x00 Project   Chen-Yang Li (黎振陽)
• [rt2x00-users] RT3070 stalling seconds after connect   Michel Bouwmans
• [rt2x00-users] RT3070 stalling seconds after connect   Michel Bouwmans
• [rt2x00-users] RT3350 Wi-Fi   Luis Correia
• [rt2x00-users] RT3350 Wi-Fi   Luis Correia
• [rt2x00-users] RT3350 Wi-Fi   Matteo Croce
• [rt2x00-users] RT3350 Wi-Fi   Matteo Croce
• [rt2x00-users] About rt2x00 Project   Ivo Van Doorn
• [rt2x00-users] [RFC/RFT 1/5] rt2800usb: initialize H2M_INT_SRC register   Ivo Van Doorn
• [rt2x00-users] [RFC/RFT 2/5] rt2800: reset RF using MCU command after firmware load   Ivo Van Doorn
• [rt2x00-users] [RFC/RFT 3/5] rt2800: disable DMA after firmware load   Ivo Van Doorn
• [rt2x00-users] [RFC/RFT 4/5] rt2800: zero MAC_SYS_CTRL bits during BBP and MAC reset   Ivo Van Doorn
• [rt2x00-users] [RFC/RTF 5/5] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Ivo Van Doorn
• [rt2x00-users] [PATCH 2/3] rt2800: Add documentation on MCU requests   Ivo Van Doorn
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Ivo Van Doorn
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Ivo Van Doorn
• [rt2x00-users] RT2800USB Question   Ivo Van Doorn
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Ivo Van Doorn
• [rt2x00-users] BUG: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue   Selim T. Erdogan
• [rt2x00-users] BUG: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue   Selim T. Erdogan
• [rt2x00-users] rt2800usb strange error message from time to time with a ralink 3070 Wireless   Fdfdfd Fdfddd
• [rt2x00-users] Kernel panic using tshark w/ rt61   Stanislaw Gruszka
• [rt2x00-users] Kernel panic using tshark w/ rt61   Stanislaw Gruszka
• [rt2x00-users] Kernel panic using tshark w/ rt61   Stanislaw Gruszka
• [rt2x00-users] [PATCH] Fix 'Error - MCU request failed' during initialization   Stanislaw Gruszka
• [rt2x00-users] same patches to test/comment   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 1/5] rt2800usb: initialize H2M_INT_SRC register   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 2/5] rt2800: reset RF using MCU command after firmware load   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 3/5] rt2800: disable DMA after firmware load   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 4/5] rt2800: zero MAC_SYS_CTRL bits during BBP and MAC reset   Stanislaw Gruszka
• [rt2x00-users] [RFC/RTF 5/5] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Stanislaw Gruszka
• [rt2x00-users] [PATCH] Fix 'Error - MCU request failed' during initialization   Stanislaw Gruszka
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Stanislaw Gruszka
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Stanislaw Gruszka
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Stanislaw Gruszka
• [rt2x00-users] BUG: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue   Stanislaw Gruszka
• [rt2x00-users] RT3070 stalling seconds after connect   Stanislaw Gruszka
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Stanislaw Gruszka
• [rt2x00-users] RT3070 stalling seconds after connect   Stanislaw Gruszka
• [rt2x00-users] Backport "rt2800pci: fix spurious interrupts generation" to Linux 3.2.x?   Stanislaw Gruszka
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Stanislaw Gruszka
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Stanislaw Gruszka
• [rt2x00-users] [PATCH 1/4] rt2800usb: initialize H2M_INT_SRC register   Stanislaw Gruszka
• [rt2x00-users] [PATCH 2/4] rt2800: disable DMA after firmware load   Stanislaw Gruszka
• [rt2x00-users] [PATCH 3/4] rt2800: zero MAC_SYS_CTRL bits during BBP and MAC reset   Stanislaw Gruszka
• [rt2x00-users] [PATCH 4/4] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 1/4] rt2800: radio 3xxx: reprogram only lower bits of RF_R3   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 2/4] rt2800: radio 3xxx: program RF_R1 during channel switch   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 3/4] rt2800: radio 3xxx: add channel switch calibration routines   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver   Stanislaw Gruszka
• [rt2x00-users] [PATCH 4/4] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Stanislaw Gruszka
• [rt2x00-users] [PATCH 4/4] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 2/8] rt2x00: Use struct rt2x00_dev driver data in rt2800{pci, usb}.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 3/8] rt2x00: Update comment on freq_offset field in struct rt2x00_dev.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 4/8] rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 5/8] rt2x00: Fix RFCSR 12 & 13 programming on RT3572 channel switching.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 6/8] rt2x00: Align RT3572 channel switch RFCSR 1 programming with Ralink driver.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 7/8] rt2x00: Fix RT3572 channel switch RFCSR 7 programming.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 8/8] rt2x00: Correctly set txmixer_gain in RT3572 channel switching.   Stanislaw Gruszka
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Stanislaw Gruszka
• [rt2x00-users] rt2800usb strange error message from time to time with a ralink 3070 Wireless   Stanislaw Gruszka
• [rt2x00-users] [PATCH 1/4] rt2800: radio 3xxx: reprogram only lower bits of RF_R3   Stanislaw Gruszka
• [rt2x00-users] [PATCH 2/4] rt2800: radio 3xxx: program RF_R1 during channel switch   Stanislaw Gruszka
• [rt2x00-users] [PATCH 3/4] rt2800: radio 3xxx: add channel switch calibration routines   Stanislaw Gruszka
• [rt2x00-users] [PATCH 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Stanislaw Gruszka
• [rt2x00-users] [PATCH 2/4] rt2800: radio 3xxx: program RF_R1 during channel switch   Stanislaw Gruszka
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Andreas Hartmann
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Andreas Hartmann
• [rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver   Andreas Hartmann
• [rt2x00-users] [PATCH 4/4] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Andreas Hartmann
• [rt2x00-users] [PATCH 4/4] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Andreas Hartmann
• [rt2x00-users] [RFC/RFT 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Andreas Hartmann
• [rt2x00-users] rt2800usb strange error message from time to time with a ralink 3070 Wireless   Andreas Hartmann
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Andreas Hartmann
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Andreas Hartmann
• [rt2x00-users] rt2800usb strange error message from time to time with a ralink 3070 Wireless   Andreas Hartmann
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Andreas Hartmann
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Andreas Hartmann
• [rt2x00-users] Backport "rt2800pci: fix spurious interrupts generation" to Linux 3.2.x?   Dennis Martin Herbers
• [rt2x00-users] Backport "rt2800pci: fix spurious interrupts generation" to Linux 3.2.x?   Dennis Martin Herbers
• [rt2x00-users] Backport "rt2800pci: fix spurious interrupts generation" to Linux 3.2.x?   Dennis Martin Herbers
• [rt2x00-users] Fwd: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity   Jakub Kicinski
• [rt2x00-users] Fwd: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity   Jakub Kicinski
• [rt2x00-users] [PATCH] Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH] Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Jakub Kicinski
• [rt2x00-users] [PATCH 2/3] rt2800: Add documentation on MCU requests   Jakub Kicinski
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH 3/3] rt2800pci: Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Jakub Kicinski
• [rt2x00-users] [PATCH 1/3] rt2800pci: remove rt2800pci_set_state function   Jakub Kicinski
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] [PATCH 0/3] Fix 'Error - MCU request failed' during initialization   Jakub Kicinski
• [rt2x00-users] RT2800USB Question   C. McPherson
• [rt2x00-users] RT2800USB Question   C. McPherson
• [rt2x00-users] RT2800USB Question   C. McPherson
• [rt2x00-users] Fwd: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity   Jonathan Nieder
• [rt2x00-users] rt2800usb strange error message from time to time with a ralink 3070 Wireless   Brian Norris
• [rt2x00-users] rt2800usb strange error message from time to time with a ralink 3070 Wireless   Brian Norris
• [rt2x00-users] IRQ sharing on rt2500pci   Albert Pool
• [rt2x00-users] RT3350 Wi-Fi   Helmut Schaa
• [rt2x00-users] Kernel panic using tshark w/ rt61   Helmut Schaa
• [rt2x00-users] Kernel panic using tshark w/ rt61   Helmut Schaa
• [rt2x00-users] RT3350 Wi-Fi   Helmut Schaa
• [rt2x00-users] RT3350 Wi-Fi   Helmut Schaa
• [rt2x00-users] RT3350 Wi-Fi   Helmut Schaa
• [rt2x00-users] [PATCH] Fix 'Error - MCU request failed' during initialization   Helmut Schaa
• [rt2x00-users] [RFC/RFT 4/5] rt2800: zero MAC_SYS_CTRL bits during BBP and MAC reset   Helmut Schaa
• [rt2x00-users] [RFC/RTF 5/5] rt2800usb: remove PWR_PIN_CFG=0x3 during init   Helmut Schaa
• [rt2x00-users] [RFC/RFT 1/5] rt2800usb: initialize H2M_INT_SRC register   Helmut Schaa
• [rt2x00-users] nl80211 tx power interface when max tx power is unknown?   Helmut Schaa
• [rt2x00-users] RT2800USB Question   Helmut Schaa
• [rt2x00-users] RT2800USB Question   Helmut Schaa
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Helmut Schaa
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Helmut Schaa
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Helmut Schaa
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Helmut Schaa
• [rt2x00-users] PROBLEM: rt2800lib return -128db when signal is stronger than -12db   Luigi Tarenga
• [rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 0/4] rt2x00:: syncing 3xxx radio programing with vendor driver   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 1/4] rt2800: radio 3xxx: reprogram only lower bits of RF_R3   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 2/4] rt2800: radio 3xxx: program RF_R1 during channel switch   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 3/4] rt2800: radio 3xxx: add channel switch calibration routines   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 2/8] rt2x00: Use struct rt2x00_dev driver data in rt2800{pci, usb}.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 3/8] rt2x00: Update comment on freq_offset field in struct rt2x00_dev.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 4/8] rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 5/8] rt2x00: Fix RFCSR 12 & 13 programming on RT3572 channel switching.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 6/8] rt2x00: Align RT3572 channel switch RFCSR 1 programming with Ralink driver.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 7/8] rt2x00: Fix RT3572 channel switch RFCSR 7 programming.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 8/8] rt2x00: Correctly set txmixer_gain in RT3572 channel switching.   Gertjan van Wingerde
• [rt2x00-users] [PATCH 2/4] rt2800: radio 3xxx: program RF_R1 during channel switch   Gertjan van Wingerde
• [rt2x00-users] [PATCH 4/4] rt2800: radio 3xxxx: channel switch RX/TX calibration fixes   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 0/8] rt2x00: Various clean-ups and RT3572 fixes.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 1/8] rt2x00: Introduce concept of driver data in struct rt2x00_dev.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 8/8] rt2x00: Correctly set txmixer_gain in RT3572 channel switching.   Gertjan van Wingerde
• [rt2x00-users] [RFC/RFT 4/8] rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.   Gertjan van Wingerde
• [rt2x00-users] Kernel panic using tshark w/ rt61   Kai Wohlfahrt
• [rt2x00-users] Kernel panic using tshark w/ rt61   Kai Wohlfahrt
• [rt2x00-users] Kernel panic using tshark w/ rt61   Kai Wohlfahrt
• [rt2x00-users] Fwd: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity   pol kh
• [rt2x00-users] Fwd: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity   pol kh
• [rt2x00-users] Fwd: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity   pol kh
• [rt2x00-users] New_Ralink_Hardware   jose luu
• [rt2x00-users] ?人力资源?管理?１?   vssfrsr

Last message date: Tue Jan 31 19:36:26 EST 2012
Archived on: Tue Jan 31 19:36:47 EST 2012

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...