[rt2x00-users] [PATCH 07/11] rt2800: add rt2800_rx_filter_calibration procedure

stf_xl at wp.pl stf_xl at wp.pl
Wed Apr 10 01:05:26 AEST 2013


From: Stanislaw Gruszka <stf_xl at wp.pl>

Add procedure for both bands filter calibration and use it on individual
chipset init rfcsr subroutines.

Signed-off-by: Stanislaw Gruszka <stf_xl at wp.pl>
---
 drivers/net/wireless/rt2x00/rt2800lib.c |  106 +++++++++++++++++--------------
 1 files changed, 59 insertions(+), 47 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 7130040..df8760f 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4332,8 +4332,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
-static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-				bool bw40, u8 rfcsr24, u8 filter_target)
+static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40,
+				u8 filter_target)
 {
 	unsigned int i;
 	u8 bbp;
@@ -4341,6 +4341,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
 	u8 passband;
 	u8 stopband;
 	u8 overtuned = 0;
+	u8 rfcsr24 = (bw40) ? 0x27 : 0x07;
 
 	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
 
@@ -4396,6 +4397,52 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
 	return rfcsr24;
 }
 
+static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev)
+{
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+	u8 filter_tgt_bw20;
+	u8 filter_tgt_bw40;
+	u8 rfcsr, bbp;
+
+	/*
+	 * TODO: sync filter_tgt values with vendor driver
+	 */
+	if (rt2x00_rt(rt2x00dev, RT3070)) {
+		filter_tgt_bw20 = 0x16;
+		filter_tgt_bw40 = 0x19;
+	} else {
+		filter_tgt_bw20 = 0x13;
+		filter_tgt_bw40 = 0x15;
+	}
+
+	drv_data->calibration_bw20 =
+		rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20);
+	drv_data->calibration_bw40 =
+		rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40);
+
+	/*
+	 * Save BBP 25 & 26 values for later use in channel switching (for 3052)
+	 */
+	rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
+	rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set BBP back to BW20
+	 */
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+}
+
 static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
 {
 	u8 reg;
@@ -4539,6 +4586,8 @@ static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
 		rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
 	}
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
@@ -4597,6 +4646,8 @@ static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
 	rt2800_rfcsr_read(rt2x00dev, 29, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3);
 	rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
@@ -4664,6 +4715,8 @@ static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
 	rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
 	rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
 	rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
@@ -4706,6 +4759,8 @@ static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
 	rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
 	rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
@@ -4758,6 +4813,8 @@ static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
 	rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
 	rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
@@ -4956,7 +5013,6 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 {
 	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u8 rfcsr;
-	u8 bbp;
 	u32 reg;
 
 	if (!rt2x00_rt(rt2x00dev, RT3070) &&
@@ -5007,50 +5063,6 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		return 0;
 	}
 
-	/*
-	 * Set RX Filter calibration for 20MHz and 40MHz
-	 */
-	if (rt2x00_rt(rt2x00dev, RT3070)) {
-		drv_data->calibration_bw20 =
-			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-		drv_data->calibration_bw40 =
-			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-	} else if (rt2x00_rt(rt2x00dev, RT3071) ||
-		   rt2x00_rt(rt2x00dev, RT3090) ||
-		   rt2x00_rt(rt2x00dev, RT3352) ||
-		   rt2x00_rt(rt2x00dev, RT3390) ||
-		   rt2x00_rt(rt2x00dev, RT3572)) {
-		drv_data->calibration_bw20 =
-			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
-		drv_data->calibration_bw40 =
-			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
-	}
-
-	/*
-	 * Save BBP 25 & 26 values for later use in channel switching
-	 */
-	rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
-	rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
-
-	if (!rt2x00_rt(rt2x00dev, RT5390) &&
-	    !rt2x00_rt(rt2x00dev, RT5392)) {
-		/*
-		 * Set back to initial state
-		 */
-		rt2800_bbp_write(rt2x00dev, 24, 0);
-
-		rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
-		rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-		rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-		/*
-		 * Set BBP back to BW20
-		 */
-		rt2800_bbp_read(rt2x00dev, 4, &bbp);
-		rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-		rt2800_bbp_write(rt2x00dev, 4, bbp);
-	}
-
 	if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
 	    rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 	    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
-- 
1.7.4.4





More information about the users mailing list